Before treatment with LTP Black Spot & Algae Remover. Kindly supplied by Tom Barnard, Floor Restorer.
In periods of wet weather, paths and paving slabs can very quickly become slippery and potentially dangerous. This can also be a problem year-round in areas that tend to be damp and get very little sunlight. Moist conditions cause slippery residue and algae to build up – and trying to solve the issue with more water can exacerbate the problem. However, a thorough clean using the correct treatment will restore surface appearance, grip underfoot and help to reduce future build-up.
This issue isn’t limited to any particular hard landscaped surface; it’s common on most, including natural stone pavers, porcelain pavers, concrete pavers, block paving, wood decking and composite decking.
Different types of algae
Algae comes in different forms and often creates a film or powdery deposit on pavers. The term algae also includes cushion-like moss; Liverwort, which is a flat green growth with tiny leaf-like lobes, and Lichen, which is more crust-like and can also be yellow or orange. Jelly-like growths are also common; they’re often black or dark green and these are caused by a cyanobacteria called Nostoc. None of these growths are hazardous – infact, lichen is particularly common in areas with clean air, so its appearance can be a positive sign – but slippery hard surfaces can be.
Another common problem is black spot – a speckle-like deposit that can be black or white. Black spot is a dust-like lichen that originates from plants and trees. It colonises on pavers, sending tendrils or ‘hyphae’ down into any cracks or porosity, searching for nutrients. It takes about 2-3 years to become established below the surface and it creates a slippery residue on the surface of pavers.
Addressing problem areas
Why water doesn’t work
A pressure washer and often a dose of household cleaner is a common go-to solution for slippery pavers. However, excessive water only makes conditions even better for algae to flourish and pressure washing can damage the surface of the pavers, any sealer applied and it will loosen grout. Water also won’t target hyphae or filaments anchored into place below the surface. A specialist approach is necessary to effectively remove residue and microspores below the surface; any treatment used needs to break-down the slippery residue, to have a bleaching action to restore the colour of the paver and to target any growth below the surface.
Care should be taken in selecting a suitable treatment. If a solution is acidic, it will damage acid sensitive material and erode the grout joint. We recommend LTP Black Spot & Algae Remover which can be safely used on all types of natural stone, concrete, brick and porcelain. This treatment removes all types of organic residue, slippery matter and stains, breaking down hyphae below the surface, as well as preventing regrowth. When applying the Remover, it’s also important to treat the whole area of paving, for a uniform appearance.
Before treatment with LTP Black Spot & Algae Remover. Kindly supplied by Tom Barnard, Floor Restorer.
After treatment with LTP Black Spot & Algae Remover. Kindly supplied by Tom Barnard, Floor Restorer.
How to use LTP Black Spot & Algae Remover
Before washing pavers, any large, mossy deposits should be removed. A long-handled block paving brush is a useful tool. The whole area should then be swept clean to remove other residue, dirt and leaves.
LTP Black Spot & Algae Remover should be applied neat to swept pavers, using a watering can or light pressure garden spray, where it fizzes during treatment. It should be left to act for 2-4 hours and surfaces then hosed with clean water. The solution can be used on dry and slightly damp surfaces and should be applied during a morning or afternoon of fair weather. See a video aid on the product page. Also, see LTP’s range of tools, including deck brushes and grout brushes.
LTP Black Spot & Algae Remover should be applied neat to swept pavers, using a watering can or light pressure garden spray, where it fizzes during treatment. It should be left to act for 2-4 hours and surfaces then hosed with clean water. The solution can be used on dry and slightly damp surfaces and should be applied during a morning or afternoon of fair weather. See a video aid on the product page. Also, see LTP’s range of tools, including deck brushes and grout brushes.
